Manufacturer Cross-border Inflatable Paddling Ring PVC Multi-person Donut Swimming Pool Beach Floating Raft Water Inflatable Toy

 Inflatable products should pay attention to the following matters in daily use
1. Do not approach sharp objects, such as thorny plants or sharp stones, blades.
2. When using, add a bottom cloth under the inflatable product to prevent it from being punctured by debris.
3. Do not use it as a life-saving buoy.
4. Keep away from flames or high-temperature objects.
5. When the temperature is high, do not place inflatable products with the valve closed in the car or tent.
6. Do not get sunscreen or alkaline drugs on it.
7. Please place it where pets cannot touch it.
8. The nozzle part is hard and should be avoided when resting.
9. Do not expose it to sunlight for a long time, as ultraviolet rays will slowly damage the surface material.

How to repair inflatable products

A. Repair pinholes:
If your inflatable product is accidentally pierced by a needle or a wooden thorn and has one or more small pinholes, it is easiest to repair:
1. Cover the nozzle after deflation to reduce the flow of gas in the bed;
2. Take out the glue in the repair kit and drop a drop of glue on the pinhole;
3. If the pinhole is large, take a toothpick, dip the tip of the toothpick in glue, apply it to the damaged pinhole, and then use glue to cover the pinhole mouth;
4. After the repair is completed, wait four hours before inflating.

B. Repairing cuts or burns
If your product is accidentally cut by a knife or burned by fire, please don't panic. Follow the following steps to repair it:
1. Cover the air nozzle after deflation to reduce the flow of gas in the bed;
2. Find the patch material in the repair package and cut off a piece that is large enough to cover the cut;
3. Apply glue to the damaged area, press the patch on, and glue the edge of the patch with glue;
4. Apply pressure to ensure that there are no gaps on the glue surface, and press it firmly with a smooth, heavy object;
5. Wait eight hours before inflating, and the repair is complete.

C. Suede repair
1. Clean the repair area carefully;
2. After drying, take out the patch, cut it, and cover it on the damaged surface, allowing a little more around;
3. Apply a layer of glue on the patch and the damaged surface, and use glue to glue the edges of the patch to ensure a thorough seal;
4. Press it firmly with a smooth, heavy object;
5. Press it tightly with a heavy object, and inflate it after 24 hours, and the repair is complete.